Use 600 grit to 200K Diamond or Oxides for cutting and polishing.
Just thoroughly clean between polishes. Fast, Flat, Aggressive,
quick polishing on most soft to hard gem materials. Cerium side
to be used with filtered water only. The highest quality, 99.9%
optical-grade cerium may be applied to the cerium coating by brush,
or wet spray to further enhance the polishing experience. [See the Free
LL-Instruction Sheet download for information on care, and use of the
LL-natural laps and cabbers.]
Please visit http://www.lightninglap.com for lapidary solutions,
such as the Lightning Lap (LL), for both Oxide and Diamond Polishing. Any polish can be used on the Lightning lap.
LL's cut and polish Flat, Sharp Facets using diamond or oxides. The BEAST is a Diamond Polishing Paste of superior
performance. Also please view the handy MAGDOP at http://MagDop.com ...
a must tool for use with either glue or wax; an aid for maximizing the final cut size of all your rough!
